Switching Devices.com: Proximity Switches, Photoelectrics, Encoders, Ultrasonic Sensors












		PRODUCT OVERVIEW - For the complete catalog go to our home page and click on the DUELCO link.


	NST-3 Emergency Stop Relay Category 2/3, EN 954-1 •Inexpensive •Forced contacts •Doubling of output contacts •Internal redundancy •22,5 mm slimline relay		NST-4 Emergency Stop Relay Category 4, EN 954-1 •4 input alternatives •Status indication with dual colour LEDs •Automatic,monitored or manual reset •22,5 mm slimline relay for safety Category 4

	NST-8 Emergency Stop Relay Category 4, EN 954-1 • 1 or 2 channel operation • 3 safety outputs • 1 signal output • Safety category 4 • PTC-fuse against short circuit of wires		NST-9 Emergency Stop Relay •4 input alternatives •2 NO safety outputs +1 NC signal output •2 NO time delayed outputs (0 -6 sec.) •3 transistor outputs for PLC-monitoring •Status indication with LEDs •Possibility for delayed coupling (0 -16 sec.) •Detachable terminals Category 3/4, EN 954-1

	N S T -1 2 Emergency Stop Relay • 10 A contact load • 1 or 2 channel operation • Multi voltage • 3 NO safety outputs • 1 NC signal contact • PTC-fuse against short circuit of wires • Detachable terminals		NST-2003 Emergency Stop Relay •22,5 mm slim line emergency stop relay •Transistor output for PLC monitoring •New house types •Choice between fixed and detachable terminals •New voltage versions •Same number of contacts as bigger and more space demanding relays

	HR-8 Two Hand Control Relay •Compact two hand control relay •Safety category 4 acc.to EN 954-1 Type III C (EN 574) •Short circuit protection via PTC-fuse Category 4, EN 954-1 Type III C, EN 574		HR-20 Two Hand Control Relay •Self retaining function •Safety category 4 /Type IIIC •Short circuit protection via PTC-fuse •Detachable terminals •External voltage supply for Duelco hand sensor actuator TST-2 Category 4, EN 954-1 Type III C, EN 574

	TL-4 Two Hand Control •Fulfils the requirements in EN 574 •Efficient screening of the operators hands •Robust construction /material •Delivered with mechanical push buttons		SSO-10 Standstill Monitoring Relay • Designed for 1-and 3-phase motors • Can be used in applications with frequency converters • Microprocessor controlled • 2 NO safety outputs and 1 NC signal contact • 10 A contact load • Status indication with LEDs • Detachable terminals (By 2-channel operation of 23-24,33-34,41-42) Category 3/4, EN 954-1

How to Order \| Place an Order \| Request Info. \| Sales Network \| News \| E-Mail Us EMS Controls Inc., 840 Pamela Drive, Punta Gorda, FL 33950 - Tel: 941-637-9669 - Fax: 941-637-9670